| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Warranty: | 1 Year |
Suppliers with verified business licenses
| specification | Original cloth number | Number of floors | Production time | Production efficiency | extract | Number of rows | Cutting length | Daily packet number | Daily output |
| 60g | 1 | 22 | 65% | 50draw | 20pieces | 200mm | 211200pack | 8.2ton | |
| Type 200 | 60g | 1 | 22 | 65% | 60draw | 16pieces | 200mm | 168960pack | 8.2ton |
| 60g | 1 | 22 | 65% | 80draw | 12pieces | 200mm | 126720pack | 8.2ton | |
| 60g | 1 | 22 | 65% | 100draw | 10pieces | 200mm | 105600pack | 8.2ton | |
| 80g | 1 | 22 | 65% | 50draw | 20pieces | 200mm | 211200pack | 10.9ton | |
| 80g | 1 | 22 | 65% | 60draw | 16pieces | 200mm | 168960pack | 10.9ton | |
| 80g | 1 | 22 | 65% | 80draw | 10pieces | 200mm | 126720pack | 10.9ton |
| Serial number | Component name | quantity | unit | remark | Total power per unit | Total quantity Total power |
| 1 | 1700 Unwinding frame part (with shaft) | 2 | set | 2 original cloth axes | 1.5kw | 3kw |
| 2 | 200-1700 Folding the host | 1 | set | Folding + folding function, vacuum pump | 53.1kw | 53.1kw |
| 3 | Single channel large rotary cutting machine | 1 | set | 15kw | 15kw | |
| 4 | Automatic film bag packing machine | 1 | set | 16kw | 32kw | |
| 5 | Transmission line | 1 | set | 6KW | 6KW |
| Serial number | item |
argument |
| 1 | breadth | 1700mm |
| 2 | Maximum diameter of the original cloth roll | Ø1600mm |
| 3 | Weight of the original cloth roll | Max. 0.8 tons |
| 4 | Original Booker weight (gsm) | 35-100g/m2(single layer) |
| 5 | Unwinding rack tape | One set of drive belts, cylinder control |
| 6 | Core hole specification of unwinding frame | 3inch |
| 7 | Uncoiling stand | 2 sets |
| 8 | The original layout is in tune | Operated by the control panel |
| 9 | Tension system | Equipped with automatic tension adjustment function |
| 10 | Coil diameter detection | When the set diameter is reached, the automatic deceleration stops, and the cloth change prompt is carried out |
| 11 | Open book mode | Rewind counterclockwise |
| 12 | Junction form | Hand splicing |
| 13 | Broken fabric detection | There is a detection system between the tension rollers |
| 14 | power | 3KW |
| 15 | Air pressure | 0.6MPa |
| 16 | actuate | |
| 17 | Driving form | Independent drive motor, synchronous belt, flat belt, etc |
| 18 | other | |
| 19 | Protection | The main transmission components are protected by baffles |
| 20 | Correct a deviation | Standard tape correction system |
| 21 | Weight (KG) | About 1300 |
| Serial number | item | argument |
| Folded part | ||
| 1 | breadth | 1700mm |
| 2 | Design speed | 150 m/min |
| 3 | Production rate | Running speed 80-100 m/min or 8-12 strips/min (depending on the material and size of the product). |
| 4 | Finished development size | 200 mm +/-2 mm |
| 5 | Folded size | 100(0,+2) |
| 6 | Finished height | 30- 100 mm |
| 7 | Count setting | At least 40 pumps (depending on product height) |
| 8 | Control mode | Panel operation |
| 9 | Folded form | Vacuum adsorption |
| 10 | Folding type | "V" staggered folding |
| 11 | Cut cloth bottom cutter roll | The bottom rollers are evenly distributed over four blades, ensuring that each section of broken fabric is 200 (±2) mm in length. The bottom knife and the roller surface are distributed with vacuum adsorption holes to ensure that the non-woven fabric can be firmly adsorbed on the roller surface. |
| 12 | Folding roller | The circumference of the folding molding groove is evenly divided, ensuring that the length of each folded cloth is 100 (0, +4) mm.The vacuum constant pressure adsorption structure is unique to our company in China, and the vacuum adsorption effect is good. |
| 13 | Break cloth cutter roll | The helical structure is cut off to ensure the service life of the surface cutter |
| 14 | Point mode | With a point function |
| 15 | Breaking pattern | A pair of cutter rollers, each roller installed a cutter, knife fixed A pair of cutter rollers at the bottom of the breaking cloth is arranged. The cutter rollers rotate and contact with the surface cutter rollers to achieve the effect of breaking cloth. Four cutter blades are installed on the cutter rollers The break cloth function is implemented using the cylinder and is equipped with a dial reading to control the feed rate Broken cloth automatic induction cutter shaft protection system, when there is cloth, card, automatic stop Linoleum lubricated cloth bottom knife, can automatically pump oil |
| 16 | Vacuum line | Vacuum tube and construction to be provided by buyer |
| 17 | Hanging pattern | Hand splicing |
| 18 | Machine restart | Machine failure stop according to reset, start a new cycle, count hold |
| 19 | Lead pattern | S-type cloth, with independent motor to adjust tension and fabric size |
| 20 | Broken fabric detection | With broken cloth detection automatic stop function |
| 21 | Power supply | Power about 41 kW (vacuum pump 30KW, main motor 11KW) |
| 22 | Air pressure | 0.6 mpa |
| 24 | Dynamic load factor | 1.23 |
| Automatic folding | ||
| 25 | Automatic stacking system | Use servo motor independent control to achieve automatic folding function |
| 26 | Position tracking | High precision servo encoder |
| 27 | Sampling setting | Set the number of stacks via the touch screen for 100% accurate counting (set base to an even number) |
| 28 | Draw the range | 40-150 pump/Height :30-100mm |
| 29 | Number of fold | 8-12 stacks |
| 30 | Control mode | When there is a normal shutdown, a process should be completed before the shutdown |
| 31 | Minimum pressure requirement | At least 0.6Mpa |
| 32 | Gross power | 50.15kw (including fan) |
| other | ||
| Protection | The transmission components are protected by baffles | |
| dimension | 1750*2200*1386 | |
| Machine weight | About 8300KG | |
| Serial number | item | Technical parameter |
| 1 | Body size (L * W * H) | 7800×1795×2584 |
| 2 | Feed length | Less than 3000mm |
| 3 | Max roll cut size (diameter * length) | 70mm×300mm |
| 5 | Design speed | 2 x 200 ce/min |
| 6 | Production rate | 2 x 150 ce/min |
| 7 | Cutting mode | Rotary swing circular knife motion and continuous controlled cloth advance |
| 8 | Cutting channel | 1 channel |
| 9 | Cutter diameter | C610mm |
| 10 | Tool sharpening method | The cylinder pushing grinding wheel contacts the round knife to realize passive sharpening, and the sharpening parameters can be adjusted and controlled by touch screen |
| 11 | Sharpening knife feed | The round knife is automatically sharpened, the grinding wheel is automatically fed, and the parameters can be adjusted by touch screen |
| 12 | Cloth length adjustment | Through the panel control, the control accuracy is ±2mm, and the adjustable cutting length range is 60mm-250mm |
| 13 | Cut-off face perpendicularity tolerance | ±2mm |
| 14 | Finished appearance | The paper surface is not dirty or damaged due to the machine, and the cutting surface is neat after the cloth is cut |
| 15 | power | Total power 15KW |
| 16 | Minimum pressure requirement | 0.6Mpa |
| 17 | Gas consumption | 50L/ class |
| 18 | drive | Independent motor drive |
| 20 | Cloth input | Servo control, conveyor belt push forward |
| 21 | Cutter rotation | Variable frequency synchronous belt drive |
| 22 | Tool arm rotation | Variable frequency synchronous belt drive |
| 23 | Cloth output | Variable frequency motor drive, circular belt transmission |
| 24 | Machine weight | 4500 kg |
| 25 | Defense The main transmission components are protected by shields | |
| 26 | periphery | Security door lock protection, overload protection |
| Serial number | name | quantity | unit | remark |
| 1 | rack | 1 | set | |
| 2 | Film cutting system | 1 | set | |
| 3 | Film unwinding system | 1 | set | |
| 4 | Film tension system | 1 | set | |
| 5 | CAM | 1 | set | |
| 6 | Control system | 1 | set | |
| 7 | Packaging system | 1 | set | |
| 8 | Blanching system | 1 | set |
| Serial number | item | Technical paramete |
| 1 | The scope of the packaged item | Thin film packing pull-out cotton soft towel |
| 2 | Equipment material supply mode | ASF type automatic intelligent material feeding |
| 3 | Design production rate | ≤100 packets/min |
| 4 | Steady production rate | ≤70-90 packets/min |
| 5 | Packing form | Barrel material wrapped, both ends raised |
| 6 | Time to replace the wrapping film | ≤2 minutes |
| 7 | Tissue length ADAPTS to range | 150mm-200mm |
| 8 | Paper towels are highly adaptable to range | 50mm-85mm |
| 9 | Tissue width ADAPTS to range | 100mm |
| 10 | Specification conversion special parts | A set |
| 11 | Equipment size | Length 4260 mm wide 950 mm high 1890 mm |
| 12 | Equipment weight | ≤ 3100 KG |
| 13 | Maximum diameter of the rolled film | 450mm |
| 14 | Roll film paper core diameter | 75mm |
| 15 | Maximum width of roll film | 340mm |
| 16 | Packaging film material | 0.035-0.05mm CPP reversible heat sealable film, OPP/CPP double layer composite membrane |
| 17 | Compressed air | Air source pressure ≥ 5MPA |
| 18 | Cabinet power supply | Single-phase AC380V/50HZ |
| 19 | Gross power | 16 KW |
| 20 | Adaptive voltage change | +/-10% |
| 21 | I/O input | 24VDC |
| 22 | I/O output | 24VDC |
| 23 | Device motion control mode | Four-axis servo axis positioning control |
| 24 | Equipment main drive mode | 20CrMnTi mechanical CAM + electronic CAM drive |
| 25 | Equipment color and process | International milky, electrostatic spraying paint process |
| Serial number | name | unit | quantity |
| 1 | Hexagonal plate hand | set | 2 |
| 2 | Needle nose pliers | handful | 2 |
| 3 | Flat-head screwdriver | handful | 2 |
| 4 | Phillips screwdriver | handful | 2 |
| 5 | Hole stopper pliers | handful | 2 |
| 6 | Ring clamp for shaft | handful | 2 |
| 7 | Movable wrench | handful | 2 |
| 8 | Utility knife | handful | 2 |
){kind=link}