Friendly Price Flushable Toilet Paper Machine Making Packing Machine

Product Description

1. Technical parameter

1,Reel-off stand(one set/unit)

NO.	Item	Technical parameter
1	Maximum effective width of base fabric (mm)	1650mm
2	Diameter of base fabric (mm)	1500
3	Unwinding speed (m/min)	<200
4	Inner diameter of base fabric roll core	∮76.2mm
5	Weight of base fabric (t)	Maximum 1 ton
6	Unwinding system	Belt width 240mm
7	Edge alignment and alignment of base fabric width	Controlled manually
8	Threading method	Manual cloth guiding
9	Cloth cutting detection	Equipped with a cloth cutting detection system. When the cloth is cut, the entire machine stops to reduce the waste of base fabric.
10	Power	1KW
11	Minimum air pressure requirement	0.4Mpa
12	Air consumption	Approximately 1 cubic meter per hour
	Transmission
13	Power	Driven by an independent motor
14	Cloth feeding belt	Synchronous belt drive, flat belt drive
	Others
15	Protection	The main transmission components are protected by protective covers
16	Size	L:3872*2626(W)*2225(H)
17	Weight (KG)	350kg

2,GE-8T-1700-Full-automatic dot-breaking folding machine (1 set / unit)
 

Folding part
NO.	Item	Technical parameter
1	Maximum width of base fabric (mm)	1700mm
2	Design speed (m/min)	200m/min
3	Stable production speed	>100m/min
4	Folding method	Continuous operation, wind suction folding
5	Cloth cutting method	Fixed cloth cutting with spiral surface knife
6	Overall machine structure	Wall panel form
7	Finished product specification	200±2mm
8	Roller knife	3*2
9	Specification after folding	100(0,+3)mm
10	Cloth guiding method	Manual paper guiding
11	S-shaped cloth feeding device	Before cloth cutting, an S-shaped pulling roller is adopted, and the tension can be adjusted through the taper pulley;
12	Vacuum power	30KW_fan
13	Power	21kw
14	Minimum air pressure requirement	0.4Mpa
Automatic folding and stacking section
15	Automatic folding and stacking system	It is independently controlled by using servo motors to realize the automatic folding and stacking function
16	Positioning tracking	Adopt high-precision servo encoders
17	Setting of the extracted quantity	The number of folding sheets can be set through the touch screen, and 100% accurate counting can be carried out (the set base number is an even number)
18	Setting range of the extraction number	40-100 pulls/height:35-120mm
19	Maximum number of folding times	16 folds
20	Minimum air pressure requirement	At least 0.4Mpa
21	Power	4.75KW
Cloth-pressing and shaping system
22	Function	Make semi-finished products formed to be suitable for packaging.
23	Conveyor belt	Use anti-static belts.
24	Transmission mode	Independent frequency converter control.
25	Pressurization mode	Adopt air pressure to ensure the high stability of the products.
26	Photoelectric detection system	Photoelectric detection is installed on the conveyor frame to ensure no collision between each semi-finished product.
27	Power	1.28 kw
28	Minimum air pressure requirement	At least 0.4 Mpa
Transmission
29	Power	Driven by an independent motor
Other
30	Protection	The main transmission components are protected by protective covers
31	Size	2480(L)*3015(W)*2225(H)
32	Weight(KG)	3700kg

 

3,GE-L200-Single-channel large gyration

 

NO.	Item	Technical parameter
1	Feed length	≤2100mm
2	Maximum fabric cutting size (width × height × length)	105×110×250
3	Minimum fabric cutting size (width × height × length)	60×50×85
4	Design speed	150/
5	Production speed	60-120/,
6	Tail-end dropping speed	1 second (optional item), this function is not included in the standard configuration
7	Conveying mode	The positioning and conveying of the conveyor belt is driven by a servo motor system
8	Fabric cutting mode	Rotary swinging circular knife movement and continuous controlled non-woven fabric advancement
9	Diameter of the fabric cutting knife	¢610mm
10	Knife sharpening method	The cylinder pushes the grinding wheel to contact the circular knife to achieve automatic knife grinding. The knife grinding parameters can be adjusted and controlled through the touch screen
11	Knife sharpening feed	Perform automatic knife grinding on the circular knife. The grinding wheel for knife grinding is automatically fed, and the parameters can be adjusted through the touch screen
12	Height compensation of the cutter holder	Use the handwheel for adjustment to achieve height compensation.
13	Length adjustment of non-woven fabric	Controlled by the panel, the control accuracy is ±2mm
14	Verticality tolerance of the cut surface	±2mm
15	Support and pressure device for non-woven fabric	Install a pressure belt on the upper part of the non-woven fabric to reduce the length error of the non-woven fabric.
16	Appearance of the finished product	There is no paper surface dirt or damage caused by the machine, and the cut surface of the non-woven fabric is neat after cutting.
17	Power	Total power 6.9KW
18	Minimum air pressure requirement	0.4Mpa
19	Dynamic load coefficient	1.1
	Transmission
20	Power	Independent motor drive
21	Non-woven fabric input	Servo control, synchronous belt drive
22	Rotation of the cutting knife	Synchronous belt drive
23	Rotation of the knife arm	Synchronous belt drive
24	Non-woven fabric output	Motor drive, synchronous belt drive
	Other
25	Protection	The main transmission components are protected by protective covers
26	Size	1700(L)*1510(W)*2020(H)
27	Weight(KG)	Safety door lock protection, overload protection

4,GE-JY316-Three-dimensional humidification system

 

NO.	Item	Unit	Qty
1	Liquid adding and liquid storage mixing tank (1000L + 1000L)	IN	1
2	Liquid adding pump (quantitative humidification)	IN	1
3	Inverted filling centrifugal pump	IN	1
4	Residual liquid recovery pump	IN	1
5	Stainless steel in contact with materials after liquid immersion (316 material)	IN	1
6	Water tanks, return water troughs, pipelines, water sprays, and valves are all made of 304 stainless steel	IN	1
7	Hygienic centrifugal pump for liquid addition, top-in and bottom-out	IN	1
8	Jiangnan hygienic centrifugal pump, inverted filling and return liquid, low-point discharge	IN	1
9	Liquid addition pipe (316) stainless steel	IN	12
10	Humidification quantity error	IN	5%

5,UT-WP100-Automatic packaging machine (high speed)
 

	UT-WP100 Main parameters
production process	Synchronous conveying → Automatic packaging → Automatic hole opening → Automatic labeling → Heat sealing and cutting → Automatic corner folding → Product air compression → Finished product output
1	Production speed: max 90 packs/minute
2	Packaging size: Length 150 - 350mm, Width 90mm - 115mm, Height 20 - 95mm
3	Label size: Length 50 - 150mm, Width 30 - 80mm
4	Hole opening size: Length 10 - 70mm, Width 5 - 50mm
5	Applicable packaging materials: PET/PE, BOPP, PET/AL/PE and other heat-sealable materials
6	Film specification: max Φ400mm, W450mm
7	Film shaft diameter: 3"
8	Number of film shafts: 2 shafts
9	Applicable labels: Transparent labels, printed labels (aluminum-coated labels need to be specially indicated)
10	Label roll diameter: max Φ350mm
11	Number of label rolls: 2 rolls
12	Labeling methods: Vertical labeling, safety labeling
13	Changeover time ≤ 60 minutes
14	Automatic shutdown and alarm for equipment failure
15	Material of components in contact with water: SUS304 (except for belts)
16	Pneumatic components: AirTAC
17	Key bearings: NSK/TNT
18	Flat belts: PU
19	Synchronous belts: Fulong
20	Power requirements: 3-phase 5-wire, AC 380V ± 5%, 50HZ ± 2%, 8KW
21	Air source requirements: 0.6 - 0.8 Mpa, 100 L/min
22	Whole machine weight: Approximately 2.5 tons
23	Bearing capacity requirement: 0.5 tons/square meter
	operation interface
1	LCD human-machine interface: 8 inches, displaying the real-time speed of the machine. It contains Chinese/English operation platforms.
2	Production data recording and storage function; providing MES data interface
3	Software, troubleshooting interface
4	Product SKU information storage function
5	The human-machine interface can operate and control the machine speed
6	Remote assistance and monitoring function

6,UT-LM80 Parallel robot capping machine
 

	UT-LM80 Capping Machine Parameters
production process	Put the cap → Automatic labeling → Mechanical hand grabs the cap → Automatic glue spraying → Visual recognition → Positioning and gluing the cap → Finished product output
	Main parameters
1	Production speed: max 80 pieces/minute
2	Capping accuracy: longitudinal ±1mm, lateral ±1.5mm
3	Labeling accuracy: longitudinal ±1mm, lateral ±1mm
4	Packaging size: length 150 - 280mm, width 85mm - 110mm, height 20 - 100mm
5	Manual bag size: length 100 - 350mm, width: 60 - 135mm
5	Cap size: length 50 - 180mm, width 50mm - 120mm, height 2 - 10mm
6	Label size: length 40 - 100mm, width 50 - 80mm
7	Applicable labels: transparent labels, printed labels. If it's aluminized composite labels, it should be indicated.
8	Label roll diameter: max Φ350mm
9	Number of label rolls: 2 rolls
10	Labeling method: longitudinal labeling
11	Model change time ≤ 60 minutes
12	Automatic shutdown and alarm for equipment failure
	Main configuration
1	Parallel robot servo: Inovance	IN	1
2	Controller: KABA	IN	1
3	Encoder: Omron	IN	1
4	Vision system: Mindvision	IN	1
5	High-speed lens: Japan Computer	IN	1
6	Glue sprayer: Huangshang	IN	1
7	Thermal insulation hose: Huangshang	IN	1
8	Glue gun: Huangshang	IN	1
9	High-frequency solenoid valve: MAC (USA)	IN	1
10	Cap detection photocell: Omron	IN	1
11	Label detection photocell: Optical fiber	IN	1
12	Circuit breaker: Schneide
14	Key bearing: OPTIBELT (Germany)
15	Flat belt: PU
16	Synchronous belt: Fulong
17	Pneumatic components: AirTAC
18	Protective door: Stainless steel doors on both sides with plexiglass windows
	operation interface
1	LCD human-machine interface: 10 inches, displaying the real-time speed of the machine, with Chinese/English operation platforms.
2	Production data recording and storage function; providing MES data interface.
3	Software, troubleshooting interface.
4	Product SKU information storage function.
5	The human-machine interface can operate and control the machine speed.
6	Remote assistance and monitoring function
	Lower cover
1	Lower cover dispenser	IN	2
2	Cap detection device	IN	2
	Labeling
1	Cap label labeling system	IN	1
2	Label detection device	IN	1
	Glue spraying
1	Glue sprayer	IN	1
2	Glue hose	IN	1
3	Nozzle	IN	1
	Grabbing the cover
1	Parallel robot	IN	1
2	Cap suction system	IN	1
	Vision
1	Visual recognition	IN	1
2	Light compensation device	IN	1
	Conveyor system
1	Cap conveying mechanism	IN	1
2	Wet wipe convey mechanism	IN	1