Automatic Gel Mask Blister Packing Machine
with One Set of Alu-PVC Mould. The Control Panel of The Machine Is Supplied with Siemens Touch-screen Control (PLC) system. All Feeder Contact Parts Are in S.S 316.The Main Body of The Machine Is Fabricated Out of S.S. 304 Quality Plate And Frame.
Main Machine Is for Alu-PVC, Filling System
The Designed Max. Output of The Machine is 20 Strokes/min Depends on Filling Volume. Model: DPP350A
Capacity:10-25 Strokes/min
Characteristics:
1.DPP Series aluminum plastic packing machine split can be packed into a 1.5 meter lift and decentralized purification plants,
2.combined use of cylinder pin position, screw-solid tight, simple assembly.
3.Die adopt platen clamping, handling is very convenient.Main electricity adopt frequency control: (punch frequency is 25 strokes/min). You could enact corresponding punch frequency according to travel and full feeding easy or hard factor.
4, Adopt engine-hand nip traction machine, running steadily, synchronization nicety, change travel and design the plate size at will on the range of 40-240mm.
5, Forming and heating plate close and open automatically, it could protract time to boot-strap after put down heating plate, limit wasting material less than one edition.
6, Air bed heat-weal, net-plate is hoisted by cylinder while stop. Avoid making cover metamorphose by heat radialization while settling, easy to clean the net-plate also, at the same time, play the role of buffer when Overpressure, is propitious to prolong machine usage life.
7, Up-down net-plate male and female work in heat-sealing, there are punctate net-veins on the positive and negative (could line-pressurize also). Because two side stress are equality, make plate more level-up, improve pressurize capability as well.
8, Ring and stop while PVC is out and discerption, easy to replace and add PVC on time for work man.
9, All hardware and container are contact with medicament, adopt stainless steel and innocuity produce, accord with "GMP" request.
Packing Leader's plant covers an area of 10,000 square meters and employs more than 50 highly skilled workers. We produce more than 300 packaging machines per year and sell them to more than 40 countries around the world.
Packing Leader's plant covers an area of 10,000 square meters and employs more than 50 highly skilled workers. We produce more than 300 packaging machines per year and sell them to more than 40 countries around the world.
At Packing leader, we design/develop all the machines. After the installation and debugging of the machines in the factory by high-tech masters, they are packaged and sent to your company. The installation is not complete until the machine is connected to the host and debugged to a normal and stable operating state as required.
After the assembly workers get the drawings, they assemble the machine in strict accordance with the drawings and the instructions of the design department personnel. During the installation process, the safety performance check of the machine is carried out simultaneously.
After the assembly workers install, the company's special inspection personnel will check the machine in time to confirm that the machine is accurately installed according to the design and can operate normally. This not only guarantees the high precision of our products, but also maximizes production efficiency.
Packing Leader pays attention to the coordination and cooperation of employees in different departments. The offices of different departments, such as design department, research and development department, testing department, assembly department and adjustment department, are closely adjacent to each other, which can fully mobilize the division of labor and cooperation of different departments and ensure the high-speed production of machines with higher quality and more accurate standards.
All the core components of the machine you can ask us, in addition, all the parts of our machines are with INOVANCE,MITSUBISHI ELECTRIC,FOTEK,CNSY, AIRTAC, CHNT,C-LIN and other well-known brands cooperation.98 % of the spare parts is available in stock and well managed by ERP systems.
){kind=link}
){kind=link}